Metal Casting & Welding for BE VTU Course 18 OBE & CBCS (III- Mech. -18ME35A)

Rs. 150.00
Tax included. Shipping calculated at checkout.

Module-1 Introduction & basic materials used in foundry : Introduction : Definition, Classification of manufacturing processes. Metals cast in the foundry-classification, factors that determine the selection of a casting alloy. Introduction to casting process & steps involved : Patterns : Definition, classification, materials used for pattern, various pattern allowances and their importance. Sand moulding : Types of base sand, requirement of base sand. Binder, Additives definition, need and types; preparation of sand moulds. Melding machines- Jolt type, squeeze type and Sand slinger. Study of important moulding process : Green sand, core sand, dry sand, sweep mould, CO2 mould, shell mould, investment mould, plaster mould, cement bonded mould. Cores : Definition, need, types. Method of making cores, Concept of gating (top, bottom, parting line, horn gate) and risers (open, blind) Functions and types. (Chapter - 1) Module-2 Melting & Metal Mold Casting Methods Melting furnaces : Classification of furnaces, Gas fired pit furnace, Resistance furnace, Coreless induction furnace, electric arc furnace, constructional features & working principle of cupola furnace. Casting using metal moulds : Gravity die casting, pressure die casting, centrifugal casting, squeeze casting, slush casting, thixocasting, and continuous casting processes. (Chapter - 2) (iv) Module-3 Solidification & Non-Ferrous Foundry Practice Solidification : Definition, nucleation, solidification variables. Directional solidification-need and methods. Degasification in liquid metals-sources of gas, degasification methods. Fettling and cleaning of castings : Basic steps involved. Sand Casting defects- causes, features and remedies. Advantages & limitations of casting process Nonferrous foundry practice : Aluminium castings - advantages, limitations, melting of Aluminium using liftout type crucible furnace. Hardeners used, drossing, gas absorption, fluxing and flushing, grain refining, pouring temperature. Stir casting set up, procedure, uses, advantages and limitations. (Chapter - 3) Module-4 Welding process : Definition, Principles, classification, application, advantages & limitations of welding. Arc welding : Principle, Metal arc welding (MAW), Flux Shielded Metal Arc Welding (FSMAW), Inert Gas Welding (TIG & MIG) Submerged Arc Welding (SAW) and Atomic Hydrogen Welding (AHW). Special type of welding : Resistance welding principles, Seam welding, Butt welding, Spot welding and Projection welding. Friction welding, Explosive welding, Thermit welding, Laser welding and Electron beam welding. (Chapter - 4) Module-5 Metallurgical Aspects in Welding, Soldering and Brazing Structure of welds, Formation of different zones during welding, Heat Affected Zone (HAZ), Parameters affecting HAZ. Effect of carbon content on structure and properties of steel, Shrinkage in welds& Residual stresses. Concept of electrodes, filler rod and fluxes. Welding defects- detection, causes & remedy. Soldering, brazing, gas welding : Soldering, Brazing, Gas Welding: Principle, oxy-Acetylene welding, oxyhydrogen welding, air-acetylene welding, Gas cutting, powder cutting. Inspection methods : Methods used for inspection of casting and welding. Visual, magnetic particle, fluorescent particle, ultrasonic. Radiography, eddy current, holography methods of inspection. (Chapter - 5)

Pickup available at Amit Warehouse

Usually ready in 1 hour

Check availability at other stores
Author: [ANUP GOEL] Pages: 266 Edition: 2020 Vendors: Technical Publications