{"title":"Gujarat Technological University (To expand the knowledge)","description":"","products":[{"product_id":"9789389750294-3","title":"Power Electronics  for  GTU 18 Course  (IV- ELECTRICAL -3140915)","description":"\u003cp\u003e1. Power switching devices : Diode, Thyristor, MOSFET, IGBT; Static characteristics of these devices; Operation of power devices as switches and switching losses, Single-quadrant switches, two-quadrant and bidirectional switches; Firing circuit for thyristors; Gate drive circuits for MOSFET and IGBT. (Chapter - 1) 2. DC-DC Converters - Switching Voltage Regulators : Linear voltage regulator, Concept of switching voltage regulators and advantages, Operation and Principle of Basic DC-DC converter topologies like Buck, Boost and Buck-Boost converter, Various control techniques for output voltage control, Mathematical analysis for these converters for steady state, Concept of CCM and DCM and factors affecting them, Closed loop control for voltage regulation, Isolated converters : Forward converter and Flyback converter; Multi-quadrant operation of DC-DC converters; Applications. (Chapter - 2) 3. DC-AC Converters - Inverters : Classification of Inverters, Half-bridge and full-bridge single-phase voltage source inverter, switch states and instantaneous output voltage, square wave operation of the inverter, concept of average voltage over a switching cycle, bipolar sinusoidal modulation and unipolar sinusoidal modulation, modulation index and output voltage, three-phase sinusoidal modulation, Three phase bridge inverter - 180° and 120° - conduction mode, SPWM control, Third harmonic injection, SVPWM, Output voltage and frequency control, Harmonic spectrum, Harmonics and its effects, Applications. (Chapter - 3) 4. AC-DC Converters : Concept of phase control using half-wave single phase ac-dc converter, Single phase and three phase half wave and full wave, 1-phase and 3- phase half controlled and fully controlled converters, Analysis with R \u0026amp; RL load, Performance parameters for converters 6. Miscellaneous :\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41888419512491,"sku":"931539717","price":395.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750294_3.jpg?v=1655402896"},{"product_id":"9789389750782-2","title":"Signals \u0026 Systems  for  GTU 18 Course  (IV- ELEX\/ E\u0026TC -3141005)","description":"\u003cp\u003eChapter - 1 Introduction to Signals and Systems Chapter - 2 Behaviour of CT and DT LTI Systems Chapter - 3 Introduction to Fourier Series and Fourier Transform Chapter - 4 z-Transform Chapter - 5 Sampling and Reconstruction Solved GTU Question Papers Solved Model Question Paper\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41888419971243,"sku":"931539653","price":410.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750782_2.jpg?v=1655402915"},{"product_id":"9789355850225-1","title":"Electric Drives  for  GTU 18 Course  (VI- Electrical \/Prof. Elec.-II - 3160919)","description":"\u003cp\u003eModule 1DC motor characteristics Review of emf and torque equations of DC machine, review of torque-speed characteristics of separately excited dc motor, change in torque-speed curve with armature voltage, example load torque-speed characteristics, operating point, armature voltage control for varying motor speed, flux weakening for high speed operation. (Chapter - 1) Module 2Chopper fed DC drive Review of dc chopper and duty ratio control, chopper fed dc motor for speed control, steady state operation of a chopper fed drive, armature current waveform and ripple, calculation of losses in dc motor and chopper, efficiency of dc drive, smooth starting. (Chapter - 2) Module 3 Multi-quadrant DC drive Review of motoring and generating modes operation of a separately excited dc machine, four quadrant operation of dc machine; single-quadrant, two-quadrant and four-quadrant choppers; steady-state operation of multi-quadrant chopper fed dc drive, regenerative braking. (Chapter - 3) Module 4 Closed-loop control of DC Drive Control structure of DC drive, inner current loop and outer speed loop, dynamic model of dc motor dynamic equations and transfer functions, modeling of chopper as gain with switching delay, plant transfer function, for controller design, current controller specification and design, speed controller specification and design. (Chapter - 4) Module 5Induction motor characteristics Review of induction motor equivalent circuit and torque-speed characteristic, variation of torque speed curve with (i) applied voltage, (ii) applied frequency and (iii) applied voltage and frequency, typical torque-speed curves of fan and pump loads, operating point, constant flux operation, flux weakening operation. (Chapter - 5) Module 6 Scalar control or constant V\/f control of induction motor Review of three-phase voltage source inverter, generation of three-phase PWM signals, sinusoidal modulation, space vector theory, conventional space vector modulation; constant V\/\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41888421281963,"sku":"931539683","price":325.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850225_1.jpg?v=1655402951"},{"product_id":"9789390450541-2","title":"Electrical Engineering Materials  for  GTU 18 Course  (VI- Electrical \/Open Elec.-II - 3160923)","description":"\u003cp\u003e1.    Conductors Classification : High conductivity, high resistivity materials, fundamental requirements of high conductivity materials and high resistivity materials, mobility of electron in metals, factors affecting conductivity and resistivity of electrical material, thermoelectric Effect : Seeback effect, Peltier effect, commonly used high conducting materials : copper, aluminium, bronze brass properties and characteristics, constantan, platinum and nichrome  properties, characteristics and applications, material used for AC and DC machines.  (Chapter 1 and 2) 2.    Dielectric Materials and Insulators Properties of gaseous, liquid and solid dielectric, dielectric as a field medium, electric conduction in gaseous, liquid and solid dielectric, breakdown in dielectric materials, mechanical and electrical properties of dielectric materials, effect of temperature on dielectric materials, polarization, loss angle and dielectric loss, petroleum based insulating oils, transformer oil, capacitor oils and its properties, classification of insulation (Solid) and application in AC and DC machines, solid electrical insulating materials, fibrous, paper boards, yarns, cloth tapes, sleeving wood, impregnation, plastics, filling and bounding materials, fibrous, film, mica, rubber, mica based materials, ceramic materials.          (Chapter 3 and 4) 3.    Magnetic Materials Basic terms, classification of magnetic material : diamagnetic, paramagnetic, ferromagnetic, anti- ferromagnetic and amorphous material, hysteresis loop, magnetic susceptibility. coercive force, curie temperature, magneto-striction, factors affecting permeability and hysteresis loss, common magnetic materials: soft and hard magnetic materials, electric steel, sheet steel, cold rolled grain-oriented silicon steel, hot rolled grain-oriented silicon steel.  (Chapter 5) 4.    Semi-Conductors and Superconductors General concepts, energy bands, types of semiconductors : intrinsic Semi-conductors, extrinsic Semi-conductors, compound semiconductor, amorphous semiconductor, hall effect, drift, mobility, diffusion in Semiconductors, semi-conductors and their applications. Superconductors : Superconductivity, properties of superconductors, critical field, Meissner effect, type-I and type-II Superconductors.  (Chapter 6 and 7) 5.    Special purpose materials Nickel iron alloys, high frequency materials, permanent magnet materials, feebly magnetic materials, ageing of a permanent magnet, effect of impurities, Losses in Magnetic materials, Refractory Materials, Structural Materials, Radioactive Materials, Galvanization and Impregnation of materials. (Chapter 8)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41888421511339,"sku":"931539700","price":215.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450541_2.jpg?v=1655402960"},{"product_id":"9789390770489-1","title":"Internal Combustion Engine for GTU 18 Course (VII - Mechanical - 3171923) - Professional Elective - V","description":"","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41888436388011,"sku":"1386813901","price":225.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390770489_1.jpg?v=1655403435"},{"product_id":"9789390041978-3","title":"Computer Graphics and Visualization for GTU 18 Course (V - IT - 3151607)","description":"\u003cp\u003e1. Introduction: History of computer graphics, applications, graphics pipeline, physical and synthetic images, synthetic camera, modeling, animation, rendering, relation to computer vision and image processing, review of basic mathematical objects (Points, Vectors, Matrix methods). (Chapter - 1) 2. Introduction to OpenGL: OpenGL architecture, primitives and attributes, simple modeling and rendering of two - and three - dimensional geometric objects, indexed and RGB color models, frame buffer, double buffering, GLUT, interaction, events and callbacks, picking. (Chapter - 2) 3. Geometric Transformations: Homogeneous coordinates, affine transformations (translation, rotation, scaling, shear), concatenation, matrix stacks and use of model view matrix in OpenGL for these operations. (Chapter - 3) 4. Viewing: Classical three dimensional viewing, computer viewing, specifying views, parallel and perspective projective transformations; Visibility - z-Buffer, BSP trees, Open-GL culling, hidden - surface algorithms. (Chapter - 4) 5. Shading: Light sources, illumination model, Gouraud and Phong shading for polygons. (Chapter - 5) Rasterization: Line segment and polygon clipping, 3D clipping, scan conversion, polygonal fill, Bresenham's algorithm. (Chapter - 6) 6. Discrete Techniques: Texture mapping, compositing, textures in OpenGL; Ray Tracing - Recursive ray tracer, ray - sphere intersection. (Chapter - 7) 7. Representation and Visualization: Bezier curves and surfaces, B-splines, visualization, interpolation, marching squares algorithm. (Chapter - 8)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41945917980843,"sku":"633132315","price":440.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390041978.jpg?v=1659311394"},{"product_id":"9788194662815-3","title":"Object Oriented Analysis and Design  for GTU 18 Course (V - IT - 3151604)","description":"\u003cp\u003e1.    Introduction : OO orientation, OO development, OO themes, Usefulness of OO Development, Modeling as a Design Technique, Modeling, Abstraction, The Three models.  (Chapter - 1) 2.    Class Modeling : Object and Class concepts, Link and Association Concepts, Generalization and inheritance, Class Model, Navigation of Class model, Advanced class Modeling, Advanced object and class concepts, Association Ends, N-ary Associations, Aggregation, Abstract classes, Multiple inheritance, Metadata, Reification, Constraints, Derived Data, Packages  (Chapter - 2) 3.    State Modeling : Events, States, Transitions and Conditions, State Diagrams, State Diagram behavior, Advance State Modeling, Nested state diagram, Nested states, Signal Generalization, Concurrency, State Model, Relation of class and State Models, Interaction Modeling Use case models, Sequence Models, Activity Models, Advanced interaction Modeling Use case relations, Procedural sequence Models, Special constructs of activity Models   (Chapter - 3) 4.    Process Overview : Development stages, Development life cycle, System conception Developing a system concept, Elaborating a concept, preparing a Problem statement, Domain Analysis, Overview of analysis, Domain class model, domain state model, domain interaction model, Iterating the analysis, Application Analysis, Application Interaction model, Application Class model, Application State Model, Adding operations.   (Chapter - 4) 5.    System Design : Overview, Estimating performance, Making a reuse plan, breaking a system into subsystems, Identifying concurrency, Allocation of subsystems, Management of data storage, Handling global resources, Choosing a software control strategy, Handling boundary conditions, Setting trade off priorities, common architectural styles, Architecture of the ATM system, Class Design Overview, gap, realizing use cases, Designing algorithms, Recursing downward, refactoring, Design optimization, Reification of behavior, Adjustment of inheritance, Organizing a class design, ATM example  (Chapter - 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41945918013611,"sku":"633132306","price":290.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9788194662815.jpg?v=1659311401"},{"product_id":"9788194754053-3","title":"Signals and Systems for GTU 18 Course (V - ELECTRICAL - 3150912)","description":"\u003cp\u003e1 Introduction to Signals and Systems: Signals and systems everyday life, biomedical, instrumentation domestic and industries. Representations of Signals, Classifications of Signals - Continuous time, Discrete time, comparison among Analog, Digital and Discrete Signals, Signal properties: periodicity, absolute integrability, determinism and stochastic character. Some special signals of importance: the unit step, the unit impulse, the sinusoid, and the complex exponential. System properties: linearity: additivity and homogeneity, shift-invariance, causality, stability, realizability. Examples. (Chapter - 1) 2. Mathematical operations on Signals and Systems: Addition, subtraction, multiplication and division of the signals, parallel and series combinations of the systems, cascading of the systems, impulse response characterization and convolution integral for CT- LTI system, signal responses to CT-LTI system, properties of convolution, LTI system response properties from impulse response, Examples. Impulse response characterization and convolution sum, Causal signal response to DT-LTI systems. Properties of convolution summation, Impulse response of DT-LTI system. DT-LTI system properties from Impulse response. System analysis from difference equation model, examples. (Chapter - 2) 3. Fourier, Laplace and z-transforms: Representation of periodic functions, Fourier series, Frequency spectrum of aperiodic signals, Fourier Transform, Relation between Laplace Transform and Fourier Transform and its properties. Parseval's Theorem. Review of the Laplace Transform for continuous time signals and systems, system functions, poles and zeros of system functions and signals, Laplace domain analysis, solution to differential equations and system behavior. The z-Transform for discrete time signals and systems, system functions, poles and zeros of systems and sequences, z-domain analysis. (Chapter - 3) 4. Sampling \u0026amp; reconstruction: 5. Applications based on IoT:\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41945920733355,"sku":"633132303","price":570.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9788194754053_3.jpg?v=1661428259"},{"product_id":"9789333221368-3","title":"Formal Language and Automata Theory for GTU 18 Course (V - IT - 3151605)","description":"\u003cp\u003e1.Introduction to Finite Automata: Introduction to Finite Automata, Central Concepts of Automata Theory, Deterministic Finite Automata (DFA), Nondeterministic Finite Automata (NFA), Finite Automata with Epsilon Transition. (Chapter - 1) 2.Regular Expressions and Languages: Regular Expressions, Finite Automata and Regular Expressions, Applications of Regular Expressions, Proving Languages Not to Be Regular, Closure Properties of Regular Languages, Equivalence and Minimization of Automata – Pumping Lemma. (Chapter - 2) 3.Context Free Grammars and Languages Parse Trees: Applications of Context Free Grammars, Ambiguity in Grammars and Languages, Eliminating Useless Symbols, Computing the Generating and Reachable Symbols, Eliminating Epsilon Productions, Eliminating Unit Productions, BacosNaur Form (BNF), Chomsky Normal Form (CNF). (Chapter - 3) 4.Pushdown Automata, CFL and NCFL: Definition of the Pushdown Automata (PDA), The Languages of a PDA, Equivalence of PDA’s and CFG’s,Deterministic Pushdown Automata , The Pumping Lemma for Context Free Languages , Closure Properties of Context Free Languages, Pumping lemma for CFL, Intersections and Complements of CFL, Non-CFL (Chapter - 4) 5.Turing Machine (TM): Problems That Computers Cannot Solve, The Turing Machine, Programming Techniques for Turing Machines, Extensions to the Basic Turing Machine, Restricted Turing Machines, Turing Machines and Computers, Definition of Post’s Correspondence Problem, A Language That Is Not Recursively Enumerable, An Undecidable Problem That Is RE, Context sensitive languages and Chomsky hierarchy, Other Undecidable Problems. (Chapter - 5) 6.Computable Functions: Partial, total, constant functions, Primitive Recursive Functions, Bounded Mineralization, Regular function, Recursive Functions. (Chapter – 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41976479514795,"sku":"633132309","price":365.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789333221368.jpg?v=1659311362"},{"product_id":"9789389180572-4","title":"Engineering Thermodynamics for GTU 18 Course (III - Mech. - 3131905)","description":"\u003cp\u003eChapter - 1 Introduction to Thermodynamics Chapter - 2 First Law of Thermodynamics Chapter - 3 Second Law of Thermodynamics Chapter - 4 Entropy Chapter - 5 Exergy Chapter - 6 Vapour Power Cycles\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41984022905003,"sku":"633132329","price":395.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389180572.jpg?v=1659034346"},{"product_id":"9789390770755-1","title":"Power System- II for GTU 18 Course (V - Electrical - 3150911)","description":"\u003cp\u003e1.    Basic Principles : Power in single phase AC circuits, Complex power, Complex power balance, Complex power flow, Balanced Three Phase Circuits, Star connected loads, Delta connected loads, Delta-star transformation, Per phase analysis, Balanced three phase power. (Chapter - 1) 2.    Representation of Power System Components : One line and impedance diagram, Per unit system, Per unit representation of transformer, Per unit impedance diagram of power system, Examples - per unit system and impedance diagram, Synchronous machine, Power factor and power control, Salient pole synchronous generator, Operating chart of a synchronous generator, Representation of loads. (Chapter - 2) 3.    Transmission Line Modeling and Performance : Introduction, Short transmission line, Medium transmission line, Long transmission line - Rigorous solution, Evaluation of ABCD constants, Interpretation of long line equations, Ferranti effect, Tuned power lines, Power through a transmission line, Circle diagrams, Methods of voltage control, Examples.     (Chapter - 3) 4.    Symmetrical Fault Analysis : Introduction, Transient on a transmission line, Short circuit of a synchronous machine on no load, short circuit of a loaded synchronous machine, Selection of circuit breakers, Examples, ZBUS formulation - by inverting YBUS, current injection technique, ZBUS building algorithm (Type - 1, 2, 3, 4 modifications). (Chapter - 4) 5.  Symmetrical Components : Symmetrical component transformation, Phase shift in star-delta transformers, Sequence impedances of transmission lines, Sequence - impedances and networks of synchronous machines, Sequence impedances and networks of transformers, Construction of sequence networks of a power system, Examples. (Chapter - 5) 6. Unsymmetrical Fault Analysis : Introduction, Symmetrical component analysis of unsymmetrical faults, Single line to ground fault, Line to line fault, Double line to ground fault, Open conductor faults. (Chapter - 6) 7. Corona : Critical Disruptive Voltage, Corona Loss, Line Design based on Corona, Disadvantages of Corona, Radio Interference, Inductive interference between Power and Communication lines, Examples. (Chapter - 7) 8. Over-voltages in Power Systems : Causes of over-voltages, Internal causes of over-voltages, Mechanism of lightning discharge, Types of lightning strokes, Harmful effects of lightning, Protection against lightning, Earthing screen, Overhead ground wires, Lightning arresters, Surge absorber. (Chapter - 8) 9.    Transients in Power Systems : Travelling waves on transmission lines, Open end line, Short circuited line, Line terminated through a resistance, Line connected to a cable, Reflection and refraction at a T-junction, Line terminated through a capacitance, capacitor connection at T, Attenuation of travelling waves. Capacitance switching, Over-voltages due to arcing ground. (Chapter - 9)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41986876571819,"sku":"2676146953","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390770755.jpg?v=1658729077"},{"product_id":"9789355850164-1","title":"Principles of Management for GTU 18 Course (V - ECE - 3151103)","description":"\u003cp\u003e1.    Management - Definition, characteristics, Objectives, levels of Management. Difference between Management and Administration. (Chapter - 1) 2.    Management History : Schools of Management, Scientific Management, The Behavioural Approach, The systems approach and the contingency approach. (Chapter - 2) 3.    Motivation - definition, types, Maslow’s Hierarchy of needs theory, Leadership – definition and its importance for a manager. (Chapter - 3) 4.    Functions of Management : Planning, organizing, staffing, controlling and leading. (Chapter - 4) 5.    Organizational Structures; meaning, principles of organization, types-formal and informal, line, line \u0026amp; staff, matrix, hybrid (explanation with merits and demerits), span of control, departmentalization, chain of command, centralization and decentralisation. (Chapter - 5) 6.    Organisational culture of Environment concept of culture and its importance, attributes culture, How does culture affect managers and employees. (Chapter - 6) 7.    Corporate Social Responsibility; meaning, importance Business Ethics; meaning, importance. (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":41986877522091,"sku":"2515109616","price":205.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850164.jpg?v=1658729086"},{"product_id":"9789390041930-2","title":"Contributor Personality Development Program for GTU 24 Course (I\/II - Common - BE01000151), GTU 18 Course (V - Common - 3150004) \u0026  20 Course (V - CSE(AI \u0026 ML) - 3150004)","description":"\u003cp\u003e\"\"\"1.The Contributor Work Ideal In this topic, Students explore what is their \"\"\"\"ideal\"\"\"\" of work - is the ideal to be a \"\"\"\"worker\"\"\"\" or to be a \"\"\"\"contributor\"\"\"\"? For example, an employee who has the ideal of a \"\"\"\"worker\"\"\"\" goes to work to pass time, earn a living, get benefits; in contrast to an employee with the ideal of a \"\"\"\"contributor\"\"\"\" who wants to make a difference, get things done well, create value for the company. This enables students to transform their expectation of themselves in work. 2.Identity and Self-esteem In this topic, Students engage with the question \"\"\"\"who am I?\"\"\"\" or on what basis do they define themselves. Is their identity defined by what others think of them (extrinsic self-esteem) or by what they think of themselves (intrinsic self-esteem)? Further, they discover positive identities that lead to intrinsic self-esteem, such as an I-can identity based on one's capacity and inner strength. This enables them to build confidence and self-esteem. 3.Become a Creator of one's destiny In a \"\"\"\"victim stance\"\"\"\", we see the career environment as full of difficulties and hurdles. We feel powerless or blame our circumstances for not having many opportunities. This makes us fearful of uncertainty and makes us settle for jobs where we remain mediocre. In this topic, students discover the \"\"\"\"creator of destiny stance\"\"\"\" to challenges and situations. This stance frees them to try out new things, open up new possibilities, take on responsibility, see the opportunity hidden in their environment. 4.Achieving Sustainable Success 5.Career Development Models 6.Expanding contribution in every role\n\u003cbr\u003e\"\"\n\u003cbr\u003e\"\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42007121002667,"sku":"633132311","price":360.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390041930_2.jpg?v=1659729146"},{"product_id":"9789355850614-1","title":"Power Electronics for GTU 18 Course (V - ECE\/Prof. Elec.-I - 3151106)","description":"\u003cp\u003eSyllabus Power Electronics - (3151106) Credits\tExamination Marks\tTotal Marks C\tTheory Marks\tPractical Marks\t \tESE (E)\tPA(M)\tESE (V)\tPA (I)\t 4\t70\t30\t30\t20\t150 1.\tCharacteristics of Semiconductor Power Devices : \tThyristor, power MOSFET and IGBT- Treatment should consist of structure, Characteristics, operation, ratings, protections and thermal considerations. Brief introduction to power devices viz. TRIAC, MOS controlled thyristor (MCT), Power Integrated Circuit (PIC) (Smart Power), Triggering\/Driver, commutation and snubber circuits for thyristor, power MOSFETs and IGBTs (discrete and IC based). Concept of fast recovery and schottky diodes as freewheeling and feedback diode. (Chapter - 1) 2.\tControlled Rectifiers : \tSingle phase : Study of semi and full bridge converters for R, RL, RLE and level loads. Analysis of load voltage and input current - Derivations of load form factor and ripple factor, Effect of source impedance, Input current Fourier series analysis of input current to derive input supply power factor, displacement factor and harmonic factor (Chapter - 2) 3.\tChoppers : \tPrinciple of chopper operation, control strategies, Analysis of Step-Up, Step-down and Step-Up\/Down chopper. Quadrant operations of Type A, Type B, Type C, Type D and type E choppers, Control techniques for choppers TRC and CLC, Detailed analysis of Type A chopper. Step up chopper. Multiphase Choppers (Chapter - 3) 4.\tSingle-phase inverters : \tPrinciple of operation of full bridge square wave, quasi-square wave, PWM inverters and comparison of their performance. Driver circuits for above inverters and mathematical analysis of output (Fourier series) voltage and harmonic control at output of inverter (Fourier analysis of output voltage). Filters at the output of inverters, Single phase current source inverter.  (Chapter - 4) 5.\tSwitching Power Supplies : \tAnalysis of fly back, forward converters for SMPS, Resonant converters - need, concept of soft switching, switching trajectory and SOAR, Load resonant converter - series loaded half bridge DC-DC converter. (Chapter - 5) 6.\tApplications : \tPower line disturbances, EMI\/EMC, power conditioners. Block diagram and configuration of UPS, salient features of UPS, selection of battery and charger ratings, sizing of UPS. Separately excited DC motor drive. P M Stepper motor Drive., DC Chopper drives, Speed control of Induction Motors .cooling and thermal. (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42019000516779,"sku":"2514974176","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850614_1.jpg?v=1659727840"},{"product_id":"9789333224222-1","title":"Object Oriented Programming with Java for GTU 18 Course (V - ICT - 3153203)","description":"\u003cp\u003eUnit - 1 : Basics of Java Features of Java, Byte Code and Java Virtual Machine, JDK, Data types, Operator, Control Statements - If , else, nested if, if-else ladders, Switch, while, do-while, for, for-each, break, continue. Single and Multidimensional Array, String class, StringBuffer class, Operations on string, Command line argument, Use of Wrapper Class. (Chapters - 1, 2) Unit - 2 : Classes, Objects and Methods Class, Object, Object reference, Constructor, Constructor Overloading, Method Overloading, Recursion, Passing and Returning object form Method, new operator, this and static keyword, finalize() method, Access control, modifiers, Nested class, Inner class, Anonymous inner class, Abstract class. (Chapter - 3) Unit - 3 : Inheritance and Interfaces Use of Inheritance, Inheriting Data members and Methods, constructor in inheritance, Multilevel Inheritance - method overriding Handle multilevel constructors - super keyword,Stop Inheritance - Final keywords, Creation and Implementation of an interface, Interface reference, instanceof operator, Interface inheritance, Dynamic method dispatch, Understanding of Java Object Class, Comparison between Abstract Class and interface, Understanding of System.out.println - statements.  (Chapter - 4) Unit - 4 : Package and Exception Handling Use of Package, CLASSPATH, Import statement, Static import, Access control, Exception and Error, Use of try, catch, throw, throws and finally, Built in Exception, Custom exception, Throwable Class.(Chapters - 5, 6) Unit - 5 : Multithreaded Programming Use of Multithread programming, Thread class and Runnable interface , Thread priority, Thread synchronization, Thread communication, Deadlock. (Chapter - 7) Unit - 6 : IO Programming Introduction to Stream, Byte Stream, Character stream, Readers and Writers, File Class, File InputStream, File Output Stream, InputStreamReader, OutputStreamWriter, FileReader, FileWriter, Buffered Reader. (Chapter - 8) Unit - 7 : Collection Classes and Networking List, AbstractList, ArrayList, LinkedList, Enumeration, Vector, Properties, Introduction to Java.util package. InetAddress class,Socket class, DatagramSocket class, DatagramPacket class. (Chapters - 9, 10) Unit - 8 : Introduction to Object orientation and Class Modeling Modeling as a Design Technique Modeling Concepts, abstraction, The three models, Class Model, State model and Interaction model. Object and class concepts, link and association, Generalization and Inheritance, Advanced Object and class concepts, Association Ends, N-ary associations, aggregation, abstract classes, multiple inheritance, Metadata, Constraints, Derived data, Packages.  (Chapters - 11, 12, 13) Unit - 9 : State modeling, Interaction Modeling Events, states, Transition and conditions, state diagram, state diagram behavior, Use case Models, sequence models, activity models. (Chapters - 14, 15)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42035885605035,"sku":"3027252703","price":545.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789333224222_1.jpg?v=1660386668"},{"product_id":"9789389180596-2","title":"Probability \u0026 Statistics for GTU 18 Course (III - ECE\/CSE\/IT - 3130006) \u0026  GTU 20 Course (CSE(AI \u0026 ML- 3130006))","description":"\u003cp\u003eBasic Probability: Experiment, definition of probability, conditional probability, independent events. Bayes' rule, Bernoulli trials. Random variables. discrete random variable. probability mass function. continuous random variable. probability density function. cumulative distribution function. properties of cumulative distribution function. Two dimensional random variables and their distribution functions. Mar!Jinal probability function. Independent random variables. (Chapter- 1) 2.\tSome Special Probability Distributions: Binomial distribution. Poisson distribution. Poisson approximation to the binomial distribution. Normal. Exponential and Gamma densities. Evaluation of statistical parameters for these distributions. (Chapter- 2) 3.\tBasic Statistics: Measure of central tendency: Moments. Expectation. dispersion. skewness. kurtosis, expected value of two dimensional random variable, Linear Correlation. correlation coefficient. rank correlation coefficient, Re!Jression. Bounds οη probability, Chebyshev's Inequality. (Chapter- 3) 4.\tApplied Statistics: Formation of Hypothesis. Test of si!Jnificance : Lar!Je sample test for sin!Jle proportion. Difference of proportions. Sin!Jle mean. Difference of means. and Difference of standard deviations. Test of si!Jnificance for Small samples: t- Test for sin!Jle mean. difference of means. t-test for correlation coefficients, F- test for ratio of variances. Chi-square test for !Joodness of fit and independence of attributes. (Chapter- 4) 5.\tCurve fitting by the numerical method: Curve fittin!J by of method of least squares. fittin!J of strai!Jht lines. second de!Jree parabola and more !Jeneral curves. (Chapter- 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42246200787115,"sku":"3382333375","price":375.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389180596_2.jpg?v=1666091823"},{"product_id":"9789355850768-1","title":"Analog and Digital Communication for GTU 18 Course (V - ECE- 3151104)","description":"\u003cp\u003eSyllabus Analog and Digital Communication - (3151104) Credits\tExamination Marks \tTotal Marks C\tTheory Marks\tPractical Marks\t \tESE  (E)\tPA  (M)\tESE Viva (V)\tPA (I)\t 5\t70\t30\t30\t20\t150 1.\tIntroduction to Communication System : \tAnalog and Digital Messages, Channel Effect, Signal-to Noise ration and capacity, Modulation and Detection, History of Communications. (Revision of Signal Transmission through a linear system, Signal distortion over a communication channel, Signal Energy and Energy spectra density, Signal power and power density). (Chapter - 1) 2.\tAmplitude modulation and Demodulations : \tSingle and Double sideband Amplitude modulation, Amplitude modulation, Bandwidth-efficient Amplitude modulation, VSB, Local Carrier synchronization, FDM, PLL. (Chapter - 2) 3.\tAngle Modulation and demodulation : \tNonlinear Modulation, Bandwidth of Angle-modulated Waves, Generating FM waves, Demodulation of FM signals, Nonlinear distortion and interference, Superheterodyne Receivers, FM broadcasting System. (Chapter - 3) 4.\tSampling and Analog to digital Conversion : \tSampling theorem, Sampling and signal reconstruction, Aliasing, Types of sampling, Quantization, PCM, Companding, DPCM, ADPCM, Delta modulation, Adaptive delta  modulation, T1 carrier system. (Chapter - 4) 5.\tDigital Data Transmission : \tComponents of digital communication system, line coding, pulse shaping, Scrambling, Regenerative Repeater, Eye Diagram, Timing Extraction, Detection Error Probability, M-ary communication, Digital Carrier Systems. (Chapter - 5) 6.\tIntroduction to Digital Modulation-Demodulation Techniques : \tModulation techniques for ASK, FSK, PSK, MSK, BPSK, QPSK, GMSK. (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42276758028459,"sku":"2514970118","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850768_1.jpg?v=1667214976"},{"product_id":"9789389750164-4","title":"Basic Mechanical Engineering for  GTU 18 Course  (I\/II-COMMON - 3110006)","description":"\u003cp\u003e1. Introduction: Prime movers and its types, Concept of Force, Pressure, Energy, Work, Power, System, Heat, Temperature, Specific heat capacity, Change of state, Path, Process, Cycle, Internal energy, Enthalpy, Statements of Zeroth law and First law. (Chapter - 1) 2. Energy: Introduction and applications of Energy sources like Fossil fuels, Nuclear fuels, Hydro, Solar, Wind, and Bio-fuels, Environmental issues like Global warming and Ozone depletion. (Chapter - 2) 3. Properties of Gases: Boyle's law, Charles's law, Gay-Lussac’s law, Avogadro’s law, Combined gas law, Gas constant, Relation between and , Various non-flow processes like constant volume process, constant pressure process, Isothermal process, Adiabatic process, Polytropic process. (Chapter - 3) 4. Properties of Steam: Steam formation, Types of steam, Enthalpy, Specific volume, Internal energy and dryness fraction of steam, use of steam tables, steam calorimeters. (Chapter - 4) 5. Heat Engines: Heat engine cycle and Heat engine, working substances, Classification of heat engines, Description and thermal efficiency of Carnot; Rankine; Otto cycle and Diesel cycles. (Chapter - 5) 6. Steam Boilers: Introduction, Classification, Cochran, Lancashire and Babcock and Wilcox boiler, Functioning of different mountings and accessories. (Chapter - 6) 7. Internal Combustion Engines: Introduction, Classification, Engine details, four-stroke\/ two-stroke cycle Petrol\/Diesel engines, Indicated power, Brake Power, Efficiencies. (Chapter - 7) 8. Pumps: 9. Air Compressors: 10. Refrigeration \u0026amp; Air Conditioning: 11. Couplings, Clutches and Brakes: 12. Transmission of Motion and Power: 13. Engineering Materials:\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42369631748267,"sku":"3644377797","price":460.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750164_4.jpg?v=1670930201"},{"product_id":"9789389750324-3","title":"Basic Electrical Engineering  for GTU 18 Course (I\/II - Common - 3110005)","description":"\u003cp\u003e1.\tDC Circuits: Electrical circuit elements (R, L and C), voltage and cuπent sources, Kirchoffs current and voltage \\aws, analysis of simple circuits with dc excitation. Superposition, Thevenin and Norton Theorems. Time-domain analysis of first-order RL and RC circuits. (Chapter - 1) 2.\tAC Circuits : Representation of sinusoidal wavefonns, peak and RMS values, Phasor representation of AC quantities, real power, reactive power, apparent power, power factor. Analysis of single-phase ac circuits consisting ofR, L, C, RL, RC, RLC combinations (series and parallel), Series and parallel resonance. Three phase balanced circuits, voltage and current relations ίη star and delta connections, Power measurement ίη three phase circuits. (Chapters - 2, 3, 4) 3.\tTransformers : Magnetic materials, ΒΗ characteristics. Construction and working principle of single phase and three phase transformers. Ideal and practical transformer. Auto-transfonner and its applications. (Chapter - 5) 4.\tElectrical Machines : Generation of rotating magnetic fields. Construction and working of following machines : •\tThree-phase induction motor. •\tSingle-phase induction motor. •\tSeparately excited DC motor. •\tSynchronous generators. (Chapter - 6) 5.\tElectrical Installations : Components of LT Switchgear : Switch Fuse Unit (SFU), MCB, ELCB, MCCB. Types of Wires and Cables. Earthing - Types of earthing and its importance. Safety precautions for electrical appliances. Types of Batteries, Important Characteristics for Batteries. Elementary calculations for energy consumption. Basics ofpower factor improvement. (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42369631781035,"sku":"3644422947","price":375.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750324_3.jpg?v=1670930197"},{"product_id":"9789389750096-3","title":"Basic Electronics  for GTU 18 Course (I\/II - Common - 3110016)","description":"\u003cp\u003eι. Diode theory and applications :  Basic idea about forward bias. reverse bias and ν'Ι characteristics. ideal diode, second and third approximation. surface mount diodes. Zener diode, Testinq of diode with multi-meter. half wave rectifier. full wave rectifier. bridqe rectifier. RC and LC filters. Desiqn of un-requlated DC power supply. Clippinq circuit, Clampinq circuit. voltaqe multiplier circuit. Readinq datasheet of semiconductor diode. (Chapter - 1)  2. Bipolar junction transistors and its biasing : BJT operation. BJT voltaqes and currents. CE. CB and CC characteristics. DC Ioad line and bias point. base bias. emitter feedbacR bias. collector feedbacR bias. voltaqe divider bias. Thermal stability. biasinq BJT switchinq circuits. transistor power dissipation and switchinq time, Testinq of bipolar junction transistor with multi-meter. Readinq datasheet of BJT. (Chapter - 2)  3. Special purpose diodes and transistors : Liqht Emittinq Diode (LED). Zener diode. Zener diode circuit for voltaqe requlation. Photo diode. Solar cell. ΡΙΝ diode. v'aractor. SchottRy diode, v'aristors. Tunnel diode, Seven Seqment display. Sixteen seqment display. ldentify seqments οη pin usinq multi-meter. Dot-matrix LED display, Photo transistor. Opto-coupler. Readinq datasheet of opto-electronics devices.(Chapter - 3)  4. AC Analysis of BJT circuits and small signal amplifier : Couplinq and bypass capacitors. AC Ioad lines. Transistor models and parameters. Common emitter circuit analysis. common base circuit analysis. common collector circuit analysis. Comparison of CE. CB and CC circuits. Transistor as a switch. (Chapter - 4)  5. Pield effect transistors (ΡΕΤ) and its biasing: Junction field effect transistors(JFET). Comparison of BJT and FET, JFET characteristics. FET, Biasinq ίη ohmic reqion and active reqion, Trans-conductance, amplification and switchinq. MOSFETs (D-type and E-type MOSFET), CMOS introduction. E-MOSFET amplifier. MOSFET testinq, Readinq datasheet for FET and MOSFET. (Chapter - 5)  6. Digital Circuits : Basic qates AND, OR,NOT, NAND. NOR, EX-OR. EX-NOR, Buildinq AND, OR Gate with diodes. Diqital Ioqic families RTL. DTL. TTL. CMOS, Comparison of Ioqic families.  (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42369631813803,"sku":"3644337384","price":335.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750096_3.jpg?v=1670915793"},{"product_id":"9789389420531-3","title":"Digital Fundamentals for GTU 18 Course (III - CSE  - 3130704)  \u0026  GTU 20 Course (CSE(Artificial Intelligence \u0026 Machine Learning - 3130704)) (Decode)","description":"\u003cp\u003e1. Module 1 : Fundamentals of Digital Systems and logic families Digital signals, digital circuits, AND, OR, NOT, NAND, NOR and Exclusive-OR operations, Boolean algebra, examples of IC gates, number systems-binary, signed binary, octal hexadecimal number, binary arithmetic, one’s and two’s complements arithmetic, codes, error detecting and correcting codes, characteristics of digital ICs, digital logic families, TTL, Schottky TTL and CMOS logic, interfacing CMOS and TTL, Tri-state logic. (Chapters - 1, 2, 3) 2. Module 2 :  Combinational Digital Circuits Standard representation for logic functions, K-map representation, and simplification of logic functions using K-map, minimization of logical functions. Don’t care conditions, Multiplexer, De-Multiplexer\/Decoders, Adders, Subtractors, BCD arithmetic, carry look ahead adder, serial adder, ALU, elementary ALU design, popular MSI chips, digital comparator, parity checker\/generator, code converters, priority encoders, decoders\/drivers for display devices, Q-M method of function realization. (Chapter - 4)  3. Module 3 :  Sequential circuits and systems A 1-bit memory, the circuit properties of Bistable latch, the clocked SR flip flop, J-K-T and D types flip flops, applications of flip flops, shift registers, applications of shift registers, serial to parallel converter, parallel to serial converter, ring counter, sequence generator, ripple(Asynchronous) counters, synchronous counters, counters design using flip flops, special counter IC’s, asynchronous sequential counters, applications of counters (Chapter - 5) 4. Module 4 :  A\/D and D\/A Converters weighted resistor\/converter, R-2R Ladder D\/A converter, specifications for D\/A converters, examples of D\/A converter ICs, sample and hold circuit, analog to digital converters: quantization and encoding, parallel comparator A\/D converter, successive approximation A\/D converter, counting A\/D converter, dual slope A\/D converter, A\/D converter using voltage to frequency and voltage to time conversion, specifications of A\/D converters, example of A\/D converter ICs. (Chapter - 6) 5. Module 5 : Semiconductor memories and Programmable logic devices. Memory organization and operation, expanding memory size, classification and characteristics of memories, sequential memory, read only memory (ROM), read and write memory(RAM), content addressable memory (CAM), charge de coupled device memory (CCD), commonly used memory chips, ROM as a PLD, Programmable logic array, Programmable array logic, complex Programmable logic devices (CPLDS), Field Programmable Gate Array (FPGA). (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42396149448875,"sku":"3690137620","price":220.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389420531_3.jpg?v=1671606973"},{"product_id":"9789389420609-3","title":"Kinematics and Theory of Machine for GTU 18 Course (III - MECH.  - 3131906) (Decode)","description":"\u003cp\u003e1. Introduction of Mechanisms and Machines : Concepts of Kinematics and Dynamics, Mechanisms and Machines, Planar and Spatial Mechanisms, Kinematic Pairs, Kinematic Chains, Kinematic Diagrams, Kinematic Inversion, Four bar chain and Slider Crank Mechanisms and their Inversions, Degrees of Freedom, Mobility and range of movement - Kutzbach and Grubler’s criterion, Number Synthesis, Grashof’s criterion, straight line mechanisms. (Chapter - 1) 2. Graphical and Analytical Linkage Synthesis : Synthesis, Function, Path, and Motion Generation, Dimensional synthesis (Graphical) : Two position synthesis, Three Position synthesis, Coupler curves, Position Analysis : Graphical position analysis of linkages, Algebraic position analysis of linkages, Four bar slider crank position solution, Two position motion generated by analytical synthesis, Three position motion generated by analytical synthesis. (Chapter - 2) 3. Velocity and Acceleration Analysis : Graphical and analytical velocity analysis of fourbar pin jointed linkages and fourbar slider crank linkages, Instant centers of velocity, Graphical and analytical acceleration analysis of fourbar pin jointed linkages and fourbar slider crank linkages, Graphical velocity and acceleration analysis of quick return mechanisms. (Chapter - 3) 4. Cams : Types of cams, Types of followers, Follower displacement programming, Derivatives of follower Motion, Motions of follower, Layout of cam profiles. (Chapter - 4) 5. Belt, Ropes and Chains : Types of belt drive, Velocity ratio, Slip, Pulley arrangement, Length of belt, Law of belting, Ratio of friction tension, Power transmitted, Centrifugal effects on belts, Maximum power transmitted, Creep, Chains, Chain length, Angular speed ratio, Classification of chain. (Chapter - 5) 6. Friction, Clutch and Brake : Introduction to friction, Law of friction, Coefficient of friction, Inclined plane, Pivot and Collars, Friction clutches, Rolling Friction, Types of brakes, Block and Shoe brakes, Differential band brake, Internal expanding shoe brake, Braking effect in vehicle. (Chapter - 6) 7. Gears and Gear Trains : Terminology, Law of Gearing, Characteristics of involute and cycloidal action, Interference and undercutting, centre distance variation, minimum number of teeth, contact ratio, spur, helical, spiral bevel and worm gears, problems.Gear Trains : Synthesis of Simple, compound \u0026amp; reverted gear trains, Analysis of epicyclic gear trains. (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42399394431147,"sku":"3700511881","price":300.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389420609_3.jpg?v=1671693387"},{"product_id":"9789389420715-3","title":"Engineering Thermodynamics for GTU 18 Course (III - MECH.  - 3131905) (Decode)","description":"\u003cp\u003e1. Introduction, Basic Concepts: Thermodynamic system and control volume, Microscopic and macroscopic point of view, thermodynamic properties, state of a substance, process and cycle, Thermodynamic equilibrium, Concept of Continuum, Quasi-static process, The Zeroth Law of Thermodynamics, Temperature scales. (Chapter -1) 2. First law of Thermodynamics: First law for a closed system undergoing a cycle and change of state, energy, PMM1, first law of thermodynamics for steady flow process, steady flow energy equation applied to nozzle, diffuser, boiler, turbine, compressor, pump, heat exchanger and throttling process, filling and emptying process Second law of thermodynamics: Limitations of first law of thermodynamics, Kelvin-Planck and Clausius statements and their equivalence, PMM2, causes of irreversibility, Carnot theorem, corollary of Carnot theorem, thermodynamic temperature scale. (Chapters - 2, 3) 3. Entropy: Clausius theorem, property of entropy, inequality of Clausius, entropy change in an irreversible process, principle of increase of entropy, entropy change for non-flow and flow processes Exergy: Exergy of a heat input in a cycle, exergy destruction in heat transfer process, exergy of finite heat capacity body, exergy of closed and steady flow system, irreversibility and Gouy-Stodola theorem and its applications, second law efficiency. (Chapters - 4, 5) 4. Vapor Power cycles: Carnot vapor cycle, Rankine cycle, comparison of Carnot and Rankine cycle, calculation of cycle efficiencies, variables affecting efficiency of Rankine cycle, reheat cycle, regenerative cycle, reheat-regenerative cycle, feed water heaters. Gas Power cycles: Recapitulation of Carnot, Otto and Diesel cycle, Dual cycle, Comparison of Otto, Diesel and Dual cycles, air standard efficiency, mean effective pressure, brake thermal efficiency, relative efficiency, Simple Brayton cycle Refrigeration Cycles: Simple Vapour Compression Refrigeration (VCR) cycle on P-h and T-s diagrams, analysis of t\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42399394463915,"sku":"3700557587","price":255.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389420715_3.jpg?v=1671693387"},{"product_id":"9789389420678-3","title":"Data Structures  for GTU 18 Course (III - CSE  - 3130702) (Decode)","description":"\u003cp\u003e1. Introduction To Data Structure : Data Management concepts, Data types - primitive and non-primitive, Performance Analysis and Measurement (Time and space analysis of algorithms-Average, best and worst case analysis), Types of Data Structures- Linear \u0026amp; Non Linear Data Structures. (Chapter - 1)  2. Linear Data Structure : Array : Representation of arrays, Applications of arrays, sparse matrix and its representation Stack: Stack- Definitions \u0026amp; Concepts, Operations On Stacks, Applications of Stacks, Polish Expression, Reverse Polish Expression And Their  Compilation, Recursion, Tower of Hanoi Queue: Representation Of Queue, Operations On Queue, Circular Queue, Priority Queue, Array representation of Priority Queue, Double Ended Queue, Applications of Queue Linked List : Singly Linked List, Doubly Linked list, Circular linked list ,Linked implementation of Stack, Linked implementation of Queue, Applications of linked list. (Chapters - 2, 3, 4, 5) 3. Nonlinear Data Structure : Tree-Definitions and Concepts, Representation of binary tree, Binary tree traversal (Inorder, postorder, preorder), Threaded binary tree, Binary search trees, Conversion of General Trees To Binary Trees, Applications Of Trees-Some balanced tree mechanism, eg. AVL trees, 2-3 trees, Height Balanced, Weight Balance, Graph-Matrix Representation Of Graphs, Elementary Graph operations,(Breadth First Search, Depth First Search, Spanning Trees, Shortest path, Minimal spanning tree). (Chapters - 6, 7) 4. Hashing and File Structures : Hashing : The symbol table, Hashing Functions, Collision-Resolution Techniques, File Structure : Concepts of fields, records and files, Sequential, Indexed and Relative\/Random File Organization, Indexing structure for index files, hashing for direct files, Multi-Key file organization and access methods. (Chapters - 8, 9) 5. Sorting \u0026amp; Searching : Sorting - Bubble Sort, Selection Sort, Quick Sort, Merge Sort Searching - Sequential Search and Binary Search. (Chapter - 10)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42400425902251,"sku":"3701237971","price":200.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389420678_3.jpg?v=1671707787"},{"product_id":"9789389420708-3","title":"Database Management Systems for GTU 18 Course (III - CSE  - 3130703)  \u0026  GTU 20 Course (CSE(Artificial Intelligence \u0026 Machine Learning - 3130703)) (Decode)","description":"\u003cp\u003e1.    Database system architecture : Data Abstraction, Data Independence, Data Definition Language (DDL), Data Manipulation Language (DML).  (Chapter - 1) 2.    Data models : Entity-relationship model, network model, relational and object oriented data models, integrity constraints, data manipulation operations. (Chapter - 2) 3.    Relational query languages : Relational algebra, Tuple and domain relational calculus, SQL3, DDL and DML constructs, Open source and Commercial DBMS - MYSQL, ORACLE, DB2, SQL server. (Chapter - 3) 4.    Relational database design : Domain and data dependency, Armstrong's axioms, Normal forms, Dependency preservation, Lossless design.  (Chapter - 4) 5.    Query processing and optimization : Evaluation of relational algebra expressions, Query equivalence, Join strategies, Query optimization algorithms. (Chapter - 5) 6.    Storage strategies : Indices, B-trees, hashing. (Chapter - 6) 7.    Transaction processing : Concurrency control, ACID property, Serializability of scheduling, Locking and timestamp based schedulers, Multi-version and optimistic Concurrency Control schemes, Database recovery. (Chapter - 7) 8.    Database security : Authentication, Authorization and access control, DAC, MAC and RBAC models, Intrusion detection, SQL injection.  (Chapter - 8) 9.    SQL concepts : Basics of SQL, DDL,DML,DCL, structure - creation, alteration, defining constraints - Primary key, foreign key, unique, not null, check, IN operator, aggregate functions, Built-in functions - numeric, date, string functions, set operations, sub-queries, correlated sub-queries, join, Exist, Any, All , view and its types., transaction control commands. (Chapter - 9) 10.    PL\/SQL concepts : Cursors, Stored Procedures, Stored Function, Database Triggers. (Chapter - 10)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42402594095275,"sku":"3701273325","price":165.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389420708_3.jpg?v=1671779779"},{"product_id":"9789390450824-3","title":"Entrepreneurship \u0026 E-Business for  GTU 18 Course  (VI- Mech.\/Open Elec.-II - 3161924)","description":"\u003cp\u003e1. Entrepreneurship : Concept, Knowledge and skills requirement; Characteristics of successful entrepreneurs; role of entrepreneurship in economic development; Entrepreneurship process; factors impacting emergence of entrepreneurship; managerial vs. entrepreneurial approach and emergence of entrepreneurship. (Chapter - 1) 2. Starting the venture : Generating business idea - sources of new ideas, methods of generating ideas, creative problem solving, opportunity recognition; environmental scanning, competitor and industry analysis.  Feasibility study : Market feasibility, Technical \/ operational feasibility, Financial feasibility; drawing business plan; preparing project report; presenting business plan to investors. (Chapter - 2) 3. Functional plans : Marketing plan - marketing research for the new venture, steps in preparing marketing plan, contingency planning. Organizational plan - Form of ownership, designing organization structure, job design, manpower planning. Financial plan - cash budget, working capital, Performa income statement Performa cash flow, perform balance sheet, break even analysis. (Chapter - 3) 4. Sources of finance and Legal Issues : Debtor equity financing, commercial banks, venture capital; financial institutions supporting entrepreneurs. Intellectual property rights patents, trademarks, copyrights, trade secrets, licensing, Franchising. (Chapter - 4) 5. Overview of E - business and Collaborative Partnerships : Concept of E-business, Business Success through adoption of technology, information management for business Initiatives, Performance improvement through e-business. Introduction to various collaborative partnerships, E-commerce : Sectors of e-commerce, B to C, B to B and C to C ecommerce, E-commerce success factors, clicks and Bricks in e-commerce, collaborative commerce. E-Marketplace, M-commerce, E-Government; Various E-business Models, Challenges of the E-Business Models, Globalization of              E-business. (Chapter - 5) 6. Strategic Initiatives for Technology Customer Relationship Management The evolution of CRM, functional areas of CRM, contemporary trends - SRM, PRM AND ERM, Future Trends of CRM.  Enterprise Resource Planning Core and Extended ERP; components of ERP system; Benefits and Risks of ERP implementation.  (Chapter - 6) 7. Business Technologies and Decision Support Systems Introduction to different business technologies : Cloud computing, and Artificial Intelligence. Business and Decision support, Components of DSS, Benefits, Geographic Information and Data Visualization Systems, Group Decision Support System. (Chapter - 7) 8. Ethics Ethics and Information, Ethical Computer Use Policy, Information. Privacy Policy, E-mail Privacy Policy, Internet Use Policy, Employee Monitoring Policies. (Chapter - 8)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42470736101547,"sku":"3860871294","price":225.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450824_3.jpg?v=1674630987"},{"product_id":"9789390450428-3","title":"Object Oriented Programming   for  GTU 18 Course  (VI- Electrical \/Prof. Elec.-II - 3160922)","description":"\u003cp\u003e1. OOP Concepts : Introduction OOP, Procedural Vs. Object Oriented Programming, Principles of OOP, Applications of OOP. (Chapter - 1) 2. Expression and Statements : Data types, Expression, control statements and Iteration, typecasting. (Chapter - 2) 3. Arrays and Functions : 1D and 2D arrays, passing data to functions, scope and visibility of variables in functions, inline function, default arguments. (Chapter - 3) 4. Classes : Basics of object and class in C++, access specifiers - private and public members, static data members, class scope, constructors and their types, destructors, operator overloading, scope operator. (Chapter - 4) 5. Overloading : Function overloading, Operator overloading, Type conversion. (Chapter - 5) 6. Inheritance : Concept of Inheritance, types of inheritance : single, multiple, multilevel, hierarchical, hybrid, protected members, overriding. (Chapter - 6) 7. Exception Handling : Introduction to exception, try-catch-throw, multiple catch, catch all, rethrowing exception, implementing user defined exceptions. (Chapter - 7) 8. I\/O and File management : Concept of streams, cin and cout objects, C++ stream classes, Unformatted and formatted I\/O, manipulators, File stream. (Chapter - 8)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42480119480491,"sku":"3887597823","price":425.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450428_3.jpg?v=1675149394"},{"product_id":"9789355850034-2","title":"Web Technology  GTU 18 Course(VI - ECE\/Open Elective - II - 3161012)","description":"\u003cp\u003e1.Introduction to Web : What is Web, Protocols and programs, Secure connections, application and development tools, the web browser, What is server, Types of Web Servers, Setting up UNIX and Linux web servers, Logging users, dynamic IP. Web Design : Web site design principles, planning the site and navigation. (Chapter - 1) 2.Introduction to HTML : HTML Basics, Elements, Attributes, Comments, Formatting, Links, Images, Tables, Lists, Block, Frames, HTML Meta Tags, HTML Forms, Form Elements, Various Input Elements. HTML 5 : Introduction to HTML5, New Elements, HTML5 Semantics, Storage API, Location API, Migration to HTML5. (Chapter - 2) 3.JavaScript : Introduction to Client-Side Scripting, Purpose of JavaScript, Basic Syntax, Variables, Operators, Loops, Functions, Arrays, Array Methods, Strings, String Methods, Regular Expression, HTML Form Validation, Debugging and Best Practices. (Chapter - 3) 4.Cascading Style Sheets : Introduction, Basic Syntax, Colors, backgrounds, Border, Margin, Padding, Height, Width, BOX Model, Other basic style elements. Layouts, Positions, Forms, Pseudo class, and elements, 2D and 3D transitions, Animations, CSS grids, Responsiveness. CSS 3.0 : Rounded Corners, Border Images, Multi background, Multi columns, Shadow, Gradients, Web Fonts, Media Types. (Chapter - 4) 5.Server-Side Scripting with PHP : Introduction to PHP, Basic Syntax, Variables, Operators, Loops, Functions, Strings, Constants, Arrays, Superglobals, PHP Form Handling, Validations, File Uploads, Cookies, Sessions, Error Handling. Connecting to Database, CRUD operations with Database, Prepared Statements and Bound Parameters, Limiting Data, Get Last ID, Example application. (Chapter - 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42480119546027,"sku":"3887603300","price":595.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850034_2.jpg?v=1675149387"},{"product_id":"9789390450343-3","title":"Data Mining for  GTU 18 Course  (VI-CE\/ CSE\/Prof. Elec.-II - 3160714)","description":"\u003cp\u003eIntroduction to data mining (DM) : Motivation for Data Mining - Data Mining-Definition and Functionalities - Classification of DM Systems - DM task primitives - Integration of a Data Mining system with a Database or a Data Warehouse - Issues in DM - KDD Process. (Chapter - 1) 2. Data Pre-processing : Data summarization, data cleaning, data integration and transformation, data reduction, data discretization and concept hierarchy generation, feature extraction, feature transformation, feature selection, introduction to Dimensionality Reduction, CUR decomposition. (Chapter - 2) 3. Concept Description, Mining Frequent Patterns, Associations and Correlations : What is concept description ? - Data Generalization and summarization - based characterization - Attribute relevance - class comparisons, Basic concept, efficient and scalable frequent item-set mining methods, mining various kind of association rules, from association mining to correlation analysis, Advanced Association Rule Techniques, Measuring the Quality of Rules. (Chapter - 3) 4. Classification and Prediction : Classification vs. prediction, Issues regarding classification and prediction, Statistical-Based Algorithms, Distance-Based Algorithms, Decision Tree-Based Algorithms, Neural Network-Based Algorithms, Rule-Based Algorithms, Combining Techniques, accuracy and error measures, evaluation of the accuracy of a classifier or predictor. Neural Network Prediction methods : Linear and nonlinear regression, Logistic Regression Introduction of tools such as DB Miner \/ WEKA \/ DTREG DM Tools. (Chapter - 4) 5. Cluster Analysis : Clustering : Problem Definition, Clustering Overview, Evaluation of Clustering Algorithms, Partitioning Clustering - K - Means Algorithm, K - Means Additional issues, PAM Algorithm; Hierarchical Clustering - Agglomerative Methods and divisive methods, Basic Agglomerative. Hierarchical Clustering, Strengths and Weakness; Outlier Detection, Clustering high dimensional data, clustering Graph and Network data. (Chapter - 5) 6. Web mining and other data mining : Web Mining : Introduction to Web Mining, Web content mining, Web usage mining, Web Structure mining, Web log structure and issues regarding web logs, Spatial Data Mining, Temporal Mining, And Multimedia Mining. Applications of Distributed and parallel Data Mining. (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42486231204011,"sku":"3891008593","price":190.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450343_3.jpg?v=1675149387"},{"product_id":"9789390450237-3","title":"Electrical Measurement \u0026 Measuring Instruments  for  GTU 18 Course  (VI- Electrical - 3160915)","description":"\u003cp\u003e1. Concepts of Measurement : Measurement System, Classification of instrument system, Methods of Measurement, Static characteristics like accuracy, precision, sensitivity, linearity, range, reproducibility, drift, threshold, dead zone etc., Dynamic characteristics like speed of response, fidelity, overshoot ect., Measurement Standards, Errors in measurement, Basic statistical evaluation of measurement data and errors - mean, standard deviation, Six sigma estimation. (Chapter - 1) 2. Transducers and Sensors : Definition, different types of transducers, criteria for selection, general characteristics and dynamic characteristics, transducers for measurement of temperature (Thermocouple and RTD), transducers for measurement of pressure, strain, transducers for measurement of displacement, speed, torque, Hall effect transducer. Sensors - basic concept - Speed and position sensors (Chapter - 2) 3. Measurement of Parameters : Measurement of resistance, Extending the range of meters - shunts, Potential divider, Instrument Transformer and their applications in the extension of instrument range, Measurement of voltage, current, power, energy, power factor and frequency (constructions and operating principles of corresponding instruments) (Chapter - 3) 4. Measurement of R, L and C : Different methods of measuring low, medium and high resistances, Wheatstone Bridge, Measurement of inductance and capacitance with the help of AC Bridges (Hay's Bridge, Schering Bridge, Maxwell bridge, anderson Bridge), LCR meter - working principles with block diagram. (Chapter - 4) 5. D.S.O : Digital recorders, Digital Storage Oscilloscope - Block diagram, theory and applications, Power scope. (Chapter - 5) 6. Display Devices : Characteristics of digital display, DVM and Digital multi meter, Clamp on meter, Megger. (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42487475208363,"sku":"3891902520","price":355.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450237_3.jpg?v=1675235792"},{"product_id":"9789390450244-3","title":"Cyber Laws \u0026 Ethics  for  GTU 18 Course  (VI- Electrical\/Mech. \/Open Elec.-II - 3161925)","description":"\u003cp\u003e1. Introduction to Cyber law : Evolution of computer Technology, emergence of cyber space. Cyber Jurisprudence, Jurisprudence and law, Doctrinal approach, Consensual approach, Real Approach, Cyber Ethics, Cyber Jurisdiction, Hierarchy of courts, Civil and criminal jurisdictions, Cyberspace-Web space, Web hosting and web Development agreement, Legal and Technological Significance of domain Names, Internet as a tool for global access. (Chapter - 1) 2. Information Technology Act : Overview of IT Act, 2000, Amendments and Limitations of IT Act, Digital Signatures, Cryptographic Algorithm, Public Cryptography, Private Cryptography, Electronic Governance, Legal Recognition of Electronic Records, Legal Recognition of Digital Signature, Certifying Authorities, Cyber Crime and Offences, Network Service Providers Liability, Cyber Regulations Appellate Tribunal, Penalties and Adjudication. (Chapter - 2) 3. Cyber law and Related Legislation : Patent Law, Trademark Law, Copyright, Software - Copyright or Patented, Domain Names and Copyright disputes, Electronic Data Base and its Protection, IT Act and Civil Procedure Code, IT Act and Criminal Procedural Code, Relevant Sections of Indian Evidence Act, Relevant Sections of Bankers Book Evidence Act, Relevant Sections of Indian Penal Code, Relevant Sections of Reserve Bank of India Act, Law Relating To Employees And Internet, Alternative Dispute Resolution , Online Dispute Resolution (ODR). (Chapter - 3) 4. Electronic Business and legal issues : Evolution and development in E-commerce, paper vs paper less contracts E-Commerce models - B2B, B2C, E security. Business, taxation, electronic payments, supply chain, EDI, E-markets, Emerging Trends. (Chapter - 4) 5. Cyber Ethics : The Importance of Cyber Law, Significance of cyber Ethics, Need for Cyber regulations and Ethics. Ethics in Information society, Introduction to Artificial Intelligence Ethics : Ethical Issues in AI and core Principles, Introduction to Block chain Ethics. (Chapter - 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42487475273899,"sku":"3891763293","price":230.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450244_3.jpg?v=1675235794"},{"product_id":"9789355850072-2","title":"Satellite Communication  GTU 18 Course(VI - ECE\/Prof. Elective - III - 3161010)","description":"\u003cp\u003e1.    Introduction to Satellite Communication : Principles and architecture of satellite communication, Brief history of satellite systems, advantages, disadvantages, applications and frequency bands used for satellite communication. (Chapter - 1) 2.    Orbital Mechanics : Orbital equations, Kepler’s laws, Apogee and Perigee for an elliptical orbit, evaluation of velocity, orbital period, angular velocity etc. of a satellite, concepts of Solar day and Sidereal day. (Chapter - 2) 3.    Satellite sub-systems : Study of architecture and roles of various sub-systems of a satellite system such as Telemetry, tracking, command and monitoring (TTC\u0026amp;M),Attitude and orbit control system (AOCS),Communication sub-system, power sub-system etc. (Chapter - 3) 4.    Typical Phenomena in Satellite Communication : Solar Eclipse on satellite, its effects, remedies for eclipse, sun transit outage phenomena, its effects and remedies, Doppler frequency shift phenomena and expression for Doppler shift. (Chapter - 4) 5.    Satellite link budget : Flux density and received signal power equations, Calculation of system noise temperature for satellite receiver, noise power calculation, Drafting of satellite link budget and C\/N ratio calculations in clean air and rainy conditions. (Chapter - 5) 6.    Modulation and Multiple Access Schemes : Various modulation schemes used in satellite communication, Meaning of multiple access, Multiple access schemes based on time, frequency and code sharing namely TDMA, FDMA and CDMA. (Chapter - 6)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42487475634347,"sku":"3891747602","price":225.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850072_2.jpg?v=1675149387"},{"product_id":"9789390450251-3","title":"Gas Dynamics for  GTU 18 Course  (VI- Mech.\/Prof. Elec.-I - 3161912)","description":"\u003cp\u003e1. Fundamentals of compressible flow : Ideal gas relationship, The adiabatic energy equation, Mach number and its significance, Mach waves, Mach cone and Mach angle, static and stagnation states, relationship between stagnation temperature, pressure, density and enthalpy in terms of Mach number, stagnation velocity of sound, reference speeds, various regions of flow, Effect of Mach number on compressibility, Area velocity relationship. (Chapter - 1) 2. One Dimensional Isentropic flow : General features of isentropic flow, performance curve, Comparison of adiabatic and isentropic process, One dimensional isentropic flow in ducts of varying cross-section-nozzles and diffusers, operation of nozzles under varying pressure ratio, mass flow rate in nozzles, critical properties and choking, area ratio as function of Mach number, Impulse function, non-dimensional mass flow rate in terms of pressure ratio, area ratio and Mach number, Working charts and gas tables, Application of Isentropic flow. Wind tunnels : Requirements, classification and applications of different types of wind tunnels. (Chapter - 2) 3. Normal shock Waves : Development of shock wave, Thickness of shock wave, governing equations, Strength of shock waves, Prandtl-Mayer relation, Rankine-Hugoniot relation, Mach number in the downstream of normal shock, variation of flow parameters across the normal shock, normal shock in Fanno and Rayleigh flows, impossibility of a rarefaction shock, supersonic diffusers, supersonic pitot tube. (Chapter - 3) 4.Flow in constant area duct with friction (Fanno flow) : Fanno curve and Fanno flow equations, solution of Fanno flow equations, variation of flow properties, variation of Mach no. with duct length, isothermal flow in constant area duct with friction, tables and charts for Fanno flow, Experimental friction coefficients. (Chapter - 4) 5. Flow in constant area duct with heat transfer (Rayleigh flow) :\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42493441573035,"sku":"3892197618","price":475.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450251_3.jpg?v=1675250193"},{"product_id":"9789390450992-2","title":"Energy Conservation  for  GTU 18 Course  (VI- Electrical \/Prof. Elec.-I - 3160916)","description":"\u003cp\u003eSyllabus Energy Conservation [3160916] CreditsExamination MarksTotal Marks Theory MarksPractical Marks CESE (E)PA (M)ESE (V)(PA) (I) 3703000100 1.Energy Audit Methodology and recent trends : General Philosophy, need of Energy Audit and Management. Definition and Objective of Energy Management, General Principles of Energy Management, Energy Management Skills, Energy Management Strategy, Economics of implementation of energy optimization projects, it’s constraints, barriers and limitations, Report-writing, preparations and presentations of energy audit reports, Post monitoring of energy conservation projects, MIS, Case-studies \/ Report studies of Energy Audits, Guidelines for writing energy audit report, data presentation in report, findings recommendations, impact of renewable energy on energy audit recommendations, Case studies of implemented energy cost optimization projects in electrical utilities as well as thermal utilities. Instruments for Audit and Monitoring Energy and Energy Savings, Types and Accuracy. 2.Electrical Distribution and Utilization : Electrical Systems, Transformers loss reductions, parallel operations, T \u0026amp; D losses, P.F. improvements, Demand Side management (DSM), Load Management, Harmonics \u0026amp; its improvements, Energy efficient motors and Soft starters, Automatic power factor Controllers, Variable speed drivers, Electronic Lighting ballasts for Lighting, LED Lighting, Trends and Approaches. Case Studies related to Power factor improvement, Electric motors, Drives, Industrial\/Commercial Lighting system, etc. with respect to energy conservation. 3.Thermal Systems : Boilers- performance evaluation, Loss analysis, Water treatment and its impact on boiler losses, integration of different systems in boiler operation. Advances in boiler technologies, FBC and PFBC boilers, Heat recovery Boilers - it’s limitations and constraints. Furnaces - Types and classifications, applications, economics and quality aspects, heat distributions,\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42503000326315,"sku":"3923440789","price":325.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450992_2.jpg?v=1675494985"},{"product_id":"9789333214520-6","title":"Energy Conservation \u0026 Management for  GTU 18 Course  (VI- Mech.\/Prof. Elec.-I - 3161919)","description":"\u003cp\u003e1. Energy Scenario : Classification of Energy, Indian energy scenario, Sectorial energy consumption (domestic, industrial and other sectors), energy needs of growing economy, energy intensity, long term energy scenario, energy pricing, energy security, energy conservation and its importance, energy strategy for the future. (Chapter - 1) Energy Conservation Act 2001 and related policies : Energy conservation Act 2001 and its features, notifications under the Act, Schemes of Bureau of Energy Efficiency (BEE) including Designated consumers, State Designated Agencies, Electricity Act 2003, Integrated energy policy, National action plan on climate change, ECBC code for Building Construction. (Chapter - 2) 2. Financial Management and Energy Monitoring and Targeting : Investment-need, appraisal and criteria, financial analysis techniques simple payback period, return on investment, net present value, internal rate of return, cash flows, risk and sensitivity analysis; financing options, energy performance contracts and role of Energy Service Companies (ESCOs) (Chapter - 3) Energy Monitoring and Targeting : Defining monitoring \u0026amp; targeting, elements of monitoring \u0026amp; targeting, data and information-analysis, techniques - energy consumption, production, cumulative sum of differences (CUSUM). Energy Management Information Systems (EMIS) (Chapter - 4) 3. Energy Management \u0026amp; Audit : Definition, energy audit, need, types of energy audit. Energy management (audit) approach-understanding energy costs, Bench marking, energy performance, matching energy use to requirement, maximizing system efficiencies, optimizing the input energy requirements, fuel and energy substitution, energy audit instruments and metering (Chapter - 5) 4. Energy Efficiency in Thermal Utilities and systems : 5. Energy and environment, air pollution, climate change :\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42509477314731,"sku":"3934847697","price":440.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789333214520_6.jpg?v=1675768583"},{"product_id":"9789390450534-3","title":"Computer Aided Design  for  GTU 18 Course  (VI- Mech.\/Prof. Elec.-I - 3161903)","description":"\u003cp\u003e1.Introduction : A typical product cycle, CAD tools for the design process of product cycle, CAD \/ CAM system evaluation criteria, Input \/ Output devices; Graphics Displays: Refresh display, DVST, Raster display, pixel value and lookup table, estimation of graphical memory, LCD, LED fundamentals. Concept of Coordinate Systems: Working Coordinate System, Model Coordinate System, Screen Coordinate System. Line and Curve generation algorithm: DDA, Bresenham’s algorithms. Graphics exchange standards and Database management systems. (Chapter - 1) 2.Curves and Surfaces : Parametric representation of lines: Locating a point on a line, parallel lines, perpendicular lines, distance of a point, Intersection of lines. Parametric representation of circle, Ellipse, parabola and hyperbola. Synthetic Curves: Concept of continuity, Cubic Spline: equation, properties and blending. Bezier Curve: equations, properties; Properties and advantages of B-Splines and NURBS. Various types of surfaces along with their typical applications. (Chapter - 2) 3.Mathematical representation of solids : Geometry and Topology, Comparison of wireframe, surface and solid models, Properties of solid model, properties of representation schemes, Concept of Half-spaces, Boolean operations. Schemes: B-rep, CSG, Sweep representation, ASM, Primitive instancing, Cell Decomposition and Octree encoding. (Chapter - 3) 4.Geometric Transformations : Homogeneous representation; Translation, Scaling, Reflection, Rotation, Shearing in 2D and 3D; Orthographic and perspective projections. Window to View-port transformation. (Chapter - 4) 5.Finite Element Analysis : Review of stress-strain relation and generalized Hooke's Law, Plane stress and Plane strain conditions; Concept of Total Potential Energy; Basic procedure for solving a problem using Finite Element Analysis. 6.Engineering optimization :\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42509709901995,"sku":"3941693230","price":440.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390450534_3.jpg?v=1675855001"},{"product_id":"9789390770540-2","title":"Power System - I  for  GTU 18 Course  (IV- ELECTRICAL - 3140914)","description":"\u003cp\u003eSyllabus Power System - I (3140914) CreditsExamination MarksTotal Marks CTheory MarksPractical Marks ESE (E)PA (M)ESE (V)PA (I) 570303020150 1.Conventional Generation, Load Curves and Tariffs : Generation scenario in India and Gujarat Steam power station, Schematic arrangement of steam power station, Equipments of steam power station, Hydroelectric power station, Schematic arrangement of hydro-electric power station, Constituents of hydro-electric plants, Nuclear power station, Schematic arrangement of nuclear power station, Nuclear reactor, Gas turbine power plant, Schematic arrangement of gas turbine power plant, comparison of various power plants. Load curves, Important terms and factors, Load duration curve, Examples. Tariff, Desirable characteristics of tariff, Types of tariff, Examples. (Chapter - 1) 2. Introduction to Wind and Solar Power Generation : The wind power plant - Introduction, wind turbine classes, Wind Turbine Components (Rotor, Nacelle, Tower, Electric Substation, Foundations). Wind Energy Conversion - Rotation principle, Forces on a rotor blade, Factors affecting performance of rotor (Aerodynamic efficiency, tip speed, tip seep ratio etc.), Thrust and torque on rotor, Power curve. Topologies and operation characteristics of SCIG based wind turbine power plant. Working Principal and operation characteristic of WRIG based wind turbine power plant. Concentrated Solar Power (CSP) plant Operation and its working, Photovoltaic Conversion - Introduction, Description and principle of working, performance characteristics of a solar cell, types of solar cell, photovoltaic system applications, Stand-alone PV system configurations, Grid-connected PV systems. (Chapter - 2) 3. Electrical Supply Systems : Electric supply system, Typical ac power supply scheme, Advantages of high transmission voltage, Overhead v\/s underground systems, Requirements of a distribution system, Connection schemes of distribution system. AC Distribution - Methods o\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42509710065835,"sku":"3941684361","price":555.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390770540_2.jpg?v=1675855002"},{"product_id":"9789355853158-1","title":"Data Mining and Business Intelligence for GTU 18 Course (VI - ICT\/Prof. Elec.-II - 3163209)","description":"\u003cp\u003eι. Overview and Concepts Data Warehousing and Business Intelligence  Why reρortinq and analysinq data. Raw data to valuaωe information-Lifecycle of data WI1at is business intelliqence ΒΙ and DW in today's perspectίve What is data warehousίnq The builclin\\I blocRs : l)efinin\\I features 1),Ιtθ warehouses c1ncl clata mc1rts Overview of the coωponents - Metadata in the data warehouse - Need for data ware!1ousίnq - Basic elements of data warehoιιsinq - Trends ίη data warehousinq. (Chapter - 1)  2. The Architecture of ΒΙ and DW ΒΙ θηcΙ DW θrchitectures nncl its tyρes Re!Btion between ΒΙ θηcΙ DW OLAI\u0026gt; (Online Analytical Processinq) definitions Difference between OLAP and OLTP Dimensional analysis What are cubes ? Drill-down and roll-up Slice and dice or rotation OLAP rnodels - ROLAP versus MOLAP - Definin􀁒 scheωas : Stars, Snowflakes and fact constellations. (Chapter - 2)  3. lntroduction to Data Mining (DM) Motivation for d,ltθ minin\\I 1),Jtθ mininΙJ-clefinition ancl functio11cllities Classific,ltion of DM systerns DM task prirnitil7es Inteqration of a data rnininq systeπ1 witl1 a database or a data warehoιιse - Issιιes ίη DM - KDD process. (Chapter - 3)  4. Data Pre-processing Why to ρre-ρrocess dcJtB? Data clennin!J: Missin!J values. Noisy dnta Data inte􀁒ωtion nnd transformation Data reduction : Data cιιbe aqqreqation, Dimensionality redιιction Data compression Numerosity reduction Data mininq primitives ιan\\Iuaqes and system architectures : Task rele17ant data - Kind of knowledqe to be π1ined - Discretization and concept hίerarchy. (Chapter - 4)  5. Concept Description and Association Rule Mining What is concept descrίρtion ? - Data !Jeneralization and summarization-based characterization -Attribute relevance - Class comparisons association rule minin!J: Market basket analysis - Basic concepts - Findin!J frequent item sets : Apriori al!Jorithm - Generatin!J rules - lmproved Aprίori al!Jorithm - Incremental ARM - Associative classification - Rule minin!J. (Chapter - 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42510766309547,"sku":"3942790537","price":295.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355853158_1.jpg?v=1675840590"},{"product_id":"9789390770441-3","title":"Image Processing for  GTU 18 Course  (VI- CSE\/IT\/Prof. Elec.-II - 3161604)","description":"\u003cp\u003e1.Digital image fundamentals : Light and Electromagnetic spectrum, Components of Image processing system, Image formation and digitization concepts, Neighbors of pixel adjacency connectivity, regions and boundaries, Distance measures, Applications. (Chapter - 1) 2.Image Enhancements : In spatial domain : Basic gray level transformations, Histogram processing, Using arithmetic\/Logic operations, smoothing spatial filters, Sharpening spatial filters. In Frequency domain : Introduction to the Fourier transform and frequency domain concepts, smoothing frequency-domain filters, Sharpening frequency domain filters. (Chapter - 2) 3.Image Restoration : Various noise models, image restoration using spatial domain filtering, image restoration using frequency domain filtering, Estimating the degradation function, Inverse filtering. (Chapter - 3) 4.Colour Image processing : Colour fundamentals, Colour models, Colour transformation, Smoothing and Sharpening, Colour segmentation. (Chapter - 4) 5.Wavelet and Multi-resolution processing : Image pyramids, Multi-resolution expansion, wavelet transform. (Chapter - 5) 6.Image compression : Introduction, Image compression model, Error-free compression, Lossy compression. (Chapter - 6) 7.Image segmentation : Detection of discontinuities, Edge linking and boundary detection, thresholding. (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42510766506155,"sku":"3942482248","price":515.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789390770441_3.jpg?v=1675840597"},{"product_id":"9789355850898-2","title":"Engineering Economics for   GTU 20 Course   (IV- CSE(AI \u0026 ML)- 3144201)","description":"\u003cp\u003eIntroduction to Economics Flow in an economy, Law of supply and demand, Fixed, Variable, Marginal \u0026amp; Average Costs, Sunk Costs, Opportunity Costs, Recurring and Nonrecurring Costs, Incremental Costs, Cash Costs vs Book Costs, Concept of Engineering Economics - Engineering efficiency, Economic efficiency, Scope of engineering economics - Element of costs, Marginal cost, Marginal Revenue, Sunk cost, Opportunity cost, Process planning.  (Chapter - 1) 2.    Cash Flow Methods of comparison of alternatives - present worth method (Revenue dominated cash flow diagram), Future worth method (Revenue dominated cash flow diagram, cost dominated cash flow diagram), Annual equivalent method (Revenue dominated cash flow diagram, cost dominated cash flow diagram), rate of return method, Benefit - Cost Ratio Analysis, Sensitivity and Break-even analysis - V ratio, Examples in all the methods.  (Chapter - 2) 3.    Inflation And Price Change Definition, Effects, Causes, Price Change with Indexes, Types of indexes, Composite vs Commodity Indexes, Use of Price Indexes in Engineering Economic Analysis, Cash Flows that inflate at different Rates. Case Study.  (Chapter - 3) 4.    Worth Analysis End-Of-Year Convention, Viewpoint of Economic Analysis Studies, Borrowed Money Viewpoint, Effect of Inflation \u0026amp; Deflation, Taxes, Economic Criteria, Applying Present Worth Techniques, Multiple Alternatives, Future Worth Analysis.  (Chapter - 4) 5.    Replacement and Maintenance analysis Types of maintenance, types of replacement problem, determination of economic life of an asset, Replacement of an asset with a new asset - capital recovery with return and concept of challenger and defender, Simple probabilistic model for items which fail completely.  (Chapter - 5) 6.    Depreciation  Introduction, Straight line method of depreciation, declining balance method of depreciation-Sum of years digits method of depreciation, sinking fund method of depreciation \/ Annuity method of depreciation.  (Chapter - 6) 7.    Corporate Social Responsibility (CSR) \u0026amp; Environmental, Social and     Governance (ESG)  - meaning, importance, business ethics, ESG factors, measurement criteria.  (Chapter - 7)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42511120826539,"sku":"3949370389","price":195.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789355850898_2.jpg?v=1675854992"},{"product_id":"9789333209748-5","title":"Fiber Optic Communication for  GTU 18 Course  (VI- Elex.\/ECE\/Prof. Elec.-II - 3161005)","description":"\u003cp\u003e1. Overview of Optical fiber Communications : Electromagnetic spectrum, Optical spectral bands, Evolution of fiber optic system, Multiplexing techniques, Elements of an optical fiber transmission link with the functional description of each block, WDM concepts, Transmission widows, Advantages of optical fiber link over conventional copper systems, Applications of fiber optic transmission systems. (Chapter - 1) 2. Optical fibers : Structures, Waveguiding and Fabrication : Optical laws and definitions, Optical fiber modes and configurations, Mode theory, Step index and graded index (GI) fibers, Single mode and graded index fibers, Derivation for numerical aperature, V number and modes supported by step index fiber, Mode field, Numerical aperture and modes supported by GI fibers, Fiber materials, Lineraly polarized modes fiber fabrication techniques and mechanical properties of fibers, Fiber optic cables. (Chapter - 2) 3. Signal Degradation in Optical Fibers : Attenuation, Signal distortion in optical waveguides, Pulse broadening in graded index fiber, Characteristics of single mode fibers, Mode coupling , International standards for optical transmission fibers. (Chapter - 3) 4. Optical Sources : Semiconductor physics background, Light emitting diode (LEDs) - structures, Materials, Figure of merits, Characteristics and modulation. Laser diodes - Modes and threshold conditions, Diode rate equations, resonant frequencies, Structures, Characteristics and figure of merits single mode lasers, Modulation of laser diodes, Spectral width temperature effects and light source linearly. (Chapter - 4) 5. Power Launching and Coupling : Source to fiber power launching, Lensing schemes, Fiber-to-fiber joints, LED coupling to single mode fibers, Fibers, Fiber splicing, Optical fiber connectors. (Chapter - 5) 6. Photodectors : Principles of operation, Types, Characteristics, Figure of\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42529087652011,"sku":"3989453907","price":325.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789333209748_5.jpg?v=1676632601"},{"product_id":"9789391567958-2","title":"Computer Networks   GTU 18 Course(VI - ECE\/ELEX.\/Prof. Elective - II - 3161007)","description":"\u003cp\u003eSyllabus Computer Networks - (3161007) CreditsExamination MarksTotal Marks CTheory MarksPractical Marks ESE (E)PA (M)ESE (V)PA (I) 4 70 30 30 20 150 1.Introduction to Data Communication and Networking Data communication, use of Networks, Internet Protocols and standards, layering of Models, OSI model, TCP\/IP Internet model. (Chapter - 1) 2.Physical Layer Transmission media (Twisted pair, Coaxial cable, Fiber optic cable), Wireless Medium as Physical Layer (Electromagnetic Spectrum, ISM Band, Lightwave Transmission), Circuit switching, DSL technology, Cable modem. (Chapter - 2) 3.Data Link Layer Services to N\/W layer, Framing, Bit Stuffing, Character Stuffing, Error control, Flow control mechanism stop \u0026amp; wait, Go-back-, Selective repeat. Example data link protocol HDLC, PPP. (Chapter - 3) 4.Medium Access Layer Channel allocation problem, Multiple Access, CSMA, CSMA\/CD, CSMA\/CA. (Chapter - 4) 5.Local Area Network Ethernet, Fast Ethernet, Gigabit Ethernet, Wireless LAN, Blue tooth, Zigbee, Connecting devices- Repeaters, Hub, Bridges, Switch, Router, Gateways, Broadband Wireless Networks. (Chapter - 5) 6.Network Layer Packet Switching, Virtual circuits and datagram, Static and Dynamic Routing Algorithms (Optimality principle, Static Routing Algorithms : Shortest Path, Flooding, Dynamic routing Algorithms : Distance Vector, Link state routing.), Congestion Control, IP Addressing, CIDR \u0026amp; NAT, IP layer protocols (ICMP, ARP, RARP, DHCP, BOOTP), IPv4 and IPv6. (Chapter - 6) 7.Transport layer Elements of Transport protocols - TCP \u0026amp; UDP. (Chapter - 7) 8.Application Layer DNS- Domain Name System, E-mail, FTP, HTTP, WWW, Firewall, Network Security. (Chapter - 8)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42529087619243,"sku":"3989444982","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789391567958_2.jpg?v=1676632600"},{"product_id":"9789389750416-4","title":"Object Oriented Programming-I for GTU 18 Course  (IV - CE\/CSE\/IT - 3140705)  \u0026 GTU 20 Course (CSE(AI \u0026 ML - 3140705))","description":"\u003cp\u003eChapter - 1 Introduction to Java and Elementary Programming Chapter - 2 Selections, Mathematical Functions and Loops Chapter - 3 Methods and Arrays Chapter - 4 Object and Classes Chapter - 5 Object Oriented Thinking Chapter - 6 Exception Handling, I\/O, Abstract Classes and Interfaces Chapter - 7 JAVAFX Basics, Event Driven Programming and Animations Chapter - 8 JAVAFX UI Controls and Multimedia Chapter - 9 Binary I\/O, Recursion and Generics Chapter - 10 List, Stacks, Queues and Priority Queues Chapter - 11 Sets and Maps Chapter - 12 Concurrency Object Oriented Programming Lab\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42529087586475,"sku":"3989439124","price":475.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750416_4.jpg?v=1676891801"},{"product_id":"9789389750836-3","title":"Economics for Engineer  for  GTU 18 Course  (IV- ELECTRICAL -3140911)","description":"\u003cp\u003e1.    Economic Decisions Making - Overview, Problems, Role, Decision making process. Engineering Costs and Estimation -  Fixed, Variable, Marginal and Average Costs, Sunk Costs, Opportunity Costs, Recurring And Nonrecurring Costs, Incremental Costs, Cash Costs vs Book Costs, Life-Cycle Costs; Types Of Estimate, Estimating Models - Per-Unit Model, Segmenting Model, Cost Indexes, Power-Sizing Model, Improvement and Learning Curve, Benefits.  Case Study - Price and Income Elasticity of Demand in the real world. (Chapter - 1)  2.    Cash Flow, Interest and Equivalence : Cash Flow - Diagrams, Categories and Computation, Time Value of Money, Debt repayment, Nominal and Effective Interest. (Chapter - 2) 3.    Cash Flow \u0026amp; Rate Of Return Analysis - Calculations, Treatment of Salvage Value, Annual Cash Flow Analysis, Analysis Periods; Internal Rate Of Return, Calculating Rate of Return, Incremental Analysis; Best Alternative Choosing An Analysis Method, Future Worth Analysis, Benefit-Cost Ratio Analysis, Sensitivity And Breakeven Analysis. Economic Analysis In The Public Sector - Quantifying And Valuing Benefits \u0026amp; drawbacks.  Case Study - Tata Motors. (Chapter - 3) 4.    Inflation And Price Change - Definition, Effects, Causes, Price Change with Indexes, Types of Index, Composite vs Commodity Indexes, Use of Price Indexes In Engineering Economic Analysis, Cash Flows that inflate at different Rates.  Case Study - Competition in the Advertise Segment in India. (Chapter - 4) 5.    Present Worth Analysis : End-Of-Year Convention, Viewpoint Of Economic Analysis Studies, Borrowed Money Viewpoint, Effect Of Inflation and Deflation, Taxes, Economic Criteria, Applying Present Worth Techniques, Multiple Alternatives. (Chapter - 5)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42531563962539,"sku":"4003608984","price":180.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750836_3.jpg?v=1676704589"},{"product_id":"9789389750645-3","title":"Analog Circuit Design  for  GTU 18 Course  (IV- ELEX\/ E\u0026TC -3141002)","description":"\u003cp\u003eChapter - 1 Transistor at High Frequencies Chapter - 2 Oscillators Chapter - 3 Feedback Amplifiers Chapter - 4 Operational Amplifiers Chapter - 5 Linear Analog Systems Chapter - 6 Non-Linear Analog Systems Chapter - 7 Specialized ICs and its Applications Chapter - 8 Power Circuits and Systems Chapter - 9Active Filters Solved Model Question Paper\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42531563995307,"sku":"4003563587","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750645_3.jpg?v=1676704589"},{"product_id":"9789389750256-3","title":"Electrical Machine-I  for  GTU 18 Course  (IV- ELECTRICAL - 3140913)","description":"\u003cp\u003eChapter - 1 Magnetic Fields and Magnetic Circuits Chapter - 2 Principles of Electromechanical Energy Conversion Chapter - 3 D.C. Machines Chapter - 4 Losses, Efficiency and Testing of D.C. Machines Chapter - 5 Single Phase Transformers Chapter - 6 Testing of Transformers Chapter - 7 Autotransformers Chapter - 8 Three Phase Transformers and Parallel Operation Solved GTU Question Papers Solved Model Question Paper\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42537386508459,"sku":"4018760637","price":360.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9789389750256_3.jpg?v=1676963777"},{"product_id":"9788194382546-3","title":"Discrete Mathematics for  GTU 18 Course  (IV- CSE\/IT- 3140708) \u0026 Discrete Mathematics and Graph Theory GTU 20 Course (CSE(Artificial Intelligence \u0026 Machine Learning - 3144202))","description":"\u003cp\u003eChapter - 1 Set Theory Chapter - 2 Functions Chapter - 3 Counting Chapter - 4 Propositional Logic Chapter - 5 Predicate Logic Chapter - 6 Relations Chapter - 7 Partial Ordering Chapter - 8 Recurrence Relations Chapter - 9 Algebraic Structures Chapter - 10 Graphs Chapter - 11 Trees Solved Model Question Paper\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42544502243499,"sku":"4045375584","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/products\/9788194382546_3.jpg?v=1677323793"},{"product_id":"9789355850041-2","title":"Digital System Design for GTU 18 Course (III - ECE\/Elex. - 3131102)","description":"\u003cp\u003eSyllabus : Digital System Design - (3131102) Credits\tExamination Marks\tTotal Marks C\tTheory Marks\tPractical Marks\t \tESE (E)\tPA(M)\tESE Viva (V)\tPA (I)\t 5\t70\t30\t30\t20\t150  1. Review of number systems, logic gates, Boolean algebra - postulates and theorems, SOP \u0026amp; POS forms, canonical forms, logic minimization using Karnaugh Map and tabulation methods up to 6 variables, Realizing logic functions using gates. (Chapters - 1, 2, 3) 2. Combinational logic circuit design : half adder full adder, BCD adder, code converters, magnitude comparator, multiplexers and decoders, MSI digital circuit design problems. (Chapter - 4) 3. Sequential logic circuit design : Flip Flops-SR, JK, T, D and master-slave FF, ripple and synchronous counters, shift registers. (Chapter - 5) 4. Introduction to Finite State Machines (FSM) : The need for state machines, The state machine, basic concepts in state machine analysis. (Chapter - 6) 5. Synchronous state machine design : Sequential counters, state changes referenced to clock, number of state flip-flops, input forming logic, output forming logic, generation of a state diagram from a timing chart, redundant states, general state machine architecture. Concept of asynchronous state machine and comparison to synchronous state machine. (Chapter - 7) 6. Logic families : Specifications, noise margin, propagation delay, fan-in, fanout, Transistor-Transistor Logic (TTL), Emitter-Coupled Logic (ECL), CMOS Logic, TTL and CMOS Gates, Introduction to basics of FINFET (Chapter - 8) 7. Programmable Logic Devices: Introduction to Programmable Logic Devices, Read-Only Memory, Programmable Logic Arrays (PLA), Programmable Array Logic (PAL), Combinational PLD-Based State Machines, State Machines on a Chip. (Chapter - 9) 8. VLSI Design flow: Design entry : Schematic, FSM \u0026amp; HDL, different modeling styles in Verilog: Behavioral and Structural Modeling, Data types and objects, Synthesis and Simulation Verilog constructs and codes for combinational and sequential circuits. (Chapter - 10) 9. A to D Converter and D to A Converter : Introduction, Digital to Analog  Conversion : Weighted Resistor D\/A Converter, R-2R Ladder D\/A Converter, Specifications for D\/A Converters, An Example of D\/A Converter IC : Digital Input Codes, Analog output, Calibration, Sample and Hold, Analog to Digital Converters : Quntization and Encoding, Parallel Comparator A\/D Converter, Counting A\/D Converter, Dual Slope A\/D Converter, A\/D Converter Using Voltage to frequency conversation, A\/D Converter Using Voltage to time conversation, Specification of A\/D Converters An Example of A\/D Converter IC : Operation, Digital Output, Analog Input, Calibration. (Chapter - 11)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42798760558763,"sku":"4802897486","price":460.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/files\/9789355850041_2_69dee14d-e83a-47a0-a342-eeebc8b21365.jpg?v=1689333397"},{"product_id":"9789390041893-4","title":"Control Engineering for GTU 18 Course (V - Mech. - 3151908 )","description":"\u003cp\u003e1.Basic Concepts of Control System Control System, Basic components of control system, classification of control system, Closed loop control versus open loop control, Servomechanism, Regulator and process control, Example of control system. (Chapter - 1) 2.Modelling of Control Systems Transfer function and impulse response function, Procedure for determining the transfer function of a control system, Block diagram of system, signal flow graph representation of physical systems along with rules, properties, Automatic control system, Lineatization of nonlinear mathematical model, mathematical modeling of Mechanical systems and Elactrical systems, Mathematuical modeling of pneumatic and hydraulic systems, Fluid systems and Thermal systems. (Chapters - 2, 3, 4, 5) 3.Modelling in Time Domain and its Response Analysis Standard test signals along with examples of their usage, Applying state space representation, converting transfer function to state space, converting state space to transfer function, diagonalisation of state matrix, solution of state equation, concepts of controllability and observability, Poles, Zeros, and System response, First order systems, Second order systems, Higher order systems, Transient response analysis, Routh’s stability criterion, Effects of Integral and Derivative control, steady state errors of feedback control systems, Root Locus plot, Lead Compensation, Lag compensation, Lag-Lead compensation, Parallel Compensation. (Chapters - 6,7,8,9,12) 4.Frequency Response Analysis Bode diagram, Polar plots, Log Magnitude versus Phase plot, Nyquist stability criterion, Stability analysis, Relative stability analysis, closed loop frequency response of unity feedback system, experimental determination of transfer function, control system design by frequency response approach, Lead Compensation, Lag compensation, Lag-Lead compensation. (Chapters - 10,11,12) 5.PID Controllers\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42798760493227,"sku":"4802860460","price":680.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/files\/9789390041893_4_8fa586a7-28c5-4557-95af-47adf0814f96.jpg?v=1689318996"},{"product_id":"9789389750898-2","title":"Control System for GTU 18 Course (III - ECE\/Elex. - 3131101)","description":"\u003cp\u003eSyllabus Control Systems - (3131101) Credits\tExamination Marks\t  Total Marks     C\tTheory Marks\tPractical Marks\t \tESE (E)\tPA (M)\tESE Viva (V)\tPA (I)\t   4\t70\t30\t30\t20\t150 1.\tIntroduction to Control Systems : Introduction, Brief History of Automatic Control, Examples of Control Systems, Engineering Design, Mechatronic Systems, The Future Evolution of Control Systems. (Chapter - 1) 2.\tMathematical Models of Systems : Differential Equations of Physical Systems, Linear Approximations of Physical Systems, The Laplace Transform, The Transfer Function of Linear Systems, Block Diagram Models, Signal-Flow Graph Models. (Chapters - 2, 3, 4, 5, 6) 3.\tFeedback Control System Characteristics :  Error Signal Analysis, Sensitivity of Control Systems to Parameter Variations, Disturbance Signals in a Feedback Control System, Control of the Transient Response, Steady-State Error, The Cost of Feedback. (Chapter - 7) 4.\tThe Performance of Feedback Control Systems : Test Input Signals, Performance of Second-Order Systems, Effects of a Third Pole and a Zero on the Second-Order System Response, Transient Response, The Steady-State Error of Feedback Control Systems, Performance Indices, The Simplification of Linear Systems. (Chapter - 8) 5.\tThe Stability of Linear Feedback Systems : The Concept of Stability, relative stability analysis, Routh-Hurwitz criteria. (Chapter - 9) 6.\tThe Root Locus Method : The Root Locus Concept. The Root Locus Procedure, Parameter Design by the Root Locus Method, Sensitivity and the Root Locus, Three-Term (PID) Controllers. (Chapter - 10) 7.\tFrequency Response Methods : Frequency Response Plots, Frequency Response Measurements, Performance Specifications in the Frequency Domain, Log Magnitude and Phase Diagrams. (Chapter - 11) 8.\tThe Design of Feedback Control Systems : Approaches to System Design, Cascade Compensation Networks, Phase-Lead Design Using the Bode Diagram, Phase-Lead Design Using the Root Locus, System Design Using Integration Networks, Phase-Lag Design Using the Root Locus, Phase-Lag Design Using the Bode Diagram, Design on the Bode Diagram Using Analytical Methods. (Chapter - 13) 9.\tStability in the Frequency Domain : Mapping Contours in the s-Plane, The Nyquist Criterion, Relative Stability and the Nyquist Criterion, Time-Domain Performance Criteria in the Frequency Domain, System Bandwidth, The Stability of Control Systems with Time Delays. (Chapters - 11, 12) 10.\tState Variable Models : The State Variables of a Dynamic System, The State Differential Equation, Signal-Flow Graph and Block Diagram Models, Alternative Signal-Flow Graph and Block Diagram Models, The Transfer Function from the State Equation, The Time Response and the State Transition Matrix. (Chapter - 14)\u003c\/p\u003e","brand":"Technical Publications","offers":[{"title":"Default Title","offer_id":42798760591531,"sku":"4802886906","price":495.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/files\/9789389750898_2_85f08b91-aeaa-48ca-acdf-8f32992a76a9.jpg?v=1689333396"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0620\/3355\/9723\/collections\/Gujarat-Technological-University-Logo.png?v=1659862127","url":"https:\/\/technicalpublications.in\/collections\/gujarat-technological-university-to-expand-the-knowledge.oembed?page=20","provider":"Technical Publications","version":"1.0","type":"link"}